Promotions and Specials
Linaire
- Test Panels & Harnesses: www.linaire.com
Busmaster 2500 - Databus Analyzer
Supported Busses
The Busmaster 2500 incorporates all of the following busses to allow for testing/troubleshooting
- ARINC 429 (High & Low) Digital Information Transfer System (DITS)
- ASCB Avionics Standard Communication Bus (bidirectional)
- CSDB (RS-422) Commercial Standard Digital Bus
- ARINC 561 Inertial Navigation System (6-wire)
- ARINC 568 DME (6-wire)
- ARINC 571 Inertial Sensor Attitude-Heading Reference System
- ARINC 575 Digital Air Data System (DADS)
Features
- Rugged Pelican Case
- Proven Touchscreen
- 8 Channels - 4 transmit, 4 receive for 429 bus
- Capable of recording fully loaded high-speed busses (not just trapping some labels)
- Analyze and trap label set with a trigger
- Can capture detail based on a specific data occurrence on triggered label
- Example: the occurrence of a label can be recorded if a bit in the binary changes and bus data preceding and following occurrence can be analyzed
- User definable label setup - full scenarios
- Scenarios can be saved and played back
- Data transferable to desktop PC for further manipulation /printing 128 Meg non-volatile storage of data
- Can store 26 hours of low-speed bus data
- Can store over 3 hours of fully-loaded high-speed data (not label trapping) 100 to 240 VAC, 4500 mAH MiMH
- Allows For Equipment ID Changes
TR-220 - DME/XPDR, Mode S, Rampt Test Set
The TR-220 Multi-Function Test Set provides complete test capability for testing Transponders (ATCRBS and Mode S), TCAS, and DME. Upgraded to provide capability for ADS-B (1090 MHz Extender Squitter and Universal Access Transceiver).
Features
- Automatic and manual testing of ATCRBS and Mode S transponders
- Allows simulation of DME distance and velocity for 3 channels
- Allows simulation of ATCRBS or Mode S intruders
- Provides test capability for direct connect or over-the-air testing
- Will allow simulation of ADS-B intruder
- Supplied with directional (hand-held) antenna
- Complies with testing requirements for European Elementary Surveillance
- Select all DME channels instead of test channels
- T/S distance - 10 to 170 ft, 5 ft increments
- Power display - watts or dBm
- 10 TCAS scenarios
- Starting Altitude
- Vertical Speed
- TCAS intruder distance
- Tail number decoding with Country Code
- Antenna Gain - 1030 to 1090 MHz
- Automatic or manual sequencing of tests
- Compliant with European CE standards
- Meets packaging requirements of MIL-PRF-28800F
- Two-year limited warranty
- Backed by 40 years experience in the manufacturing of electronic test equipment
