Multi Function Ramp Testers
TR-211
The TR-211 provides test capability for Distance Measuring Equipment (DME) and Transponders (Modes A, C, and S). The TR-211 provides the transponder and DME test functions found in its popular TR-210 Multi-Function Test Set, but with a large four-line display and new hardware to support emerging European testing requirements. The TR-211 provides the features that users demand – simple operation and innovative testing capability.
Features
- Transponder TCAS–DME–ADS–B Upgradeable
- Receives ADS-B (1090 MHz squitter)
- Transmits Traffic Information System (TIS) intruder flight data for four intruders
- Performs testing for European Mode S Elementary and Enhanced Surveillance
- Features large, four-line display for easy-to-read test results
- Large display allows expansion to meet future testing requirements
- User-friendly operation using knobs and switches, no searching through multiple menus
- Performs test requirements per FAR Part 43, Appendix F
- 2 year limited warranty
Transponder
- Test Set automatically determines capability of transponder being tested (ATCRBS or Mode S) and select appropriate tests
- Testing can be done over-the-air, using directional antenna, directly connected to transponder, or using the optional TAP-200 Anti-Radiation Coupler
- Provides test capability for European Mode S Elementary and Enhance Surveillance
- Testing can be done using automatic or manual mode
TIS and ADS-B
- Tests the newest generation in transponder technology
- Transmit four Intruder aircraft types to verify TIS operation
- Receives and decodes 1090 MHz ADS-B data, including squitter type (airborne position, surface position, aircraft Ident/category, and airborne velocity). latitude/longitude, N/S velocity, E/W velocity, Flight I.D., Mode S address, altitude (GNSS or barometric), and airspeed
DME
- Allows testing on all channels (108.00 to 117.95 MHz)
- Measures DME power, frequency, and PRF
- Transmits DME Morse Code I.D.
- User selection of DME distance and velocity
Additional Features
- RS-232 connection to download results to a PC
- Automatic shut-off to preserve battery
- Large back-lighted, liquid crystal display (LCD)
- Diagnostic self-test
TR-220
The TR-220 Multi-Function Test Set provides complete test capability for testing Transponders (ATCRBS and Mode S), TCAS, and DME. Upgraded to provide capability for ADS-B (1090 MHz Extender Squitter and Universal Access Transceiver).
Features
- Automatic and manual testing of ATCRBS and Mode S transponders
- Allows simulation of DME distance and velocity for 3 channels
- Allows simulation of ATCRBS or Mode S intruders
- Provides test capability for direct connect or over-the-air testing
- Will allow simulation of ADS-B intruder
- Supplied with directional (hand-held) antenna
- Complies with testing requirements for European Elementary Surveillance
- Select all DME channels instead of test channels
- T/S distance - 10 to 170 ft, 5 ft increments
- Power display - watts or dBm
- 10 TCAS scenarios
- Starting Altitude
- Vertical Speed
- TCAS intruder distance
- Tail number decoding with Country Code
- Antenna Gain - 1030 to 1090 MHz
- Automatic or manual sequencing of tests
- Compliant with European CE standards
- Meets packaging requirements of MIL-PRF-28800F
- Two-year limited warranty
- Backed by 40 years experience in the manufacturing of electronic test equipment